| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours on Line Service |
| Warranty: | One Year After Installation |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Workpiece size | Thickness | 5-25mm |
| Max.sizeofworkpiece | 1500×775mm | |
| Punching capacity | Punch force | 1000KN |
| Max size diameter | Φ25.5mm | |
| Punching diameter × thickness | For Q235 steel σ≤420MPa | Φ25.5×25mm |
| For Q420 steel σ≤680MPa | Φ25.5×20mm | |
| Capacity of marking | Marking force | 800KN |
| Character size | 14×10mm | |
| Quantity of characters per unit | 10 | |
| Quantity of punching heads and marking dies | 3 | |
| Install three sets of punching heads with different specifications or two sets of punch heads with different specifications and one unit character set | ||
| Quantity of CNC axes | 2 | |
| Stroke of X axis---speed | 0-18m/min | |
| Stroke of Y axis---speed | 0-18m/min | |
| Motor power | Motor power of oil pump | 22KW |
| AC servo motor power of X axis | 2KW | |
| AC servo motor power of Y axis | 2KW | |
| Hydraulic system | Highest pressure of high-lift pump | 4MPa |
| Work-pressure of high-lift pump | 20MPa | |
| Work-pressure of low-lift pump | 5.5MPa | |
| Volume of oil tank | 320L | |
| Cooling type | water cooling | |
| Remark | Refer to hydraulic part manual for details | |
| Pneumatic system | Work pressure | Max. 0.6MPa |
| Min. 0.5MPa | ||
| Electric parameters | Type | 3 phase electricity |
| Normal Pressure | 380V | |
| Normal Frequency | 60Hz | |
| Total power | 26KW | |
| Quantity of pipes and type | 3 phase, earth wire | |
| Overall dimensions (L×W×H) | 3600×2800×1870mm | |
| Net weight of the machine | About 7500kG | |
| No. | Name | Quantity | Country |
|
1.
|
AC Servo Motor | Delta | Taiwan China |
|
2.
|
PLC | Delta | |
|
3.
|
Electromagnetic unloading valve | ATOS | Italy/Taiwan China |
|
4.
|
Relief valve | ATOS | |
|
5.
|
Electromagnetic directional valve | JUSTMARK | Taiwan China |
|
6.
|
Bus bar | SMC/CKD | Japan |
|
7.
|
air valve | SMC/CKD | |
|
8.
|
Cylinder | SMC/CKD | |
|
9.
|
Duplex | Air TAC | Taiwan China |
|
10.
|
computer | LENOVO | China |
Note: The above is our fixed supplier. If the supplier can not supply the components in case of any special matter, we will adopt the components with the same level, but the quality is no worse than the above.
Company Introduction:
Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.
Our Service
FAQ:
1. When can you arrange shipment?
For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.
2. What can you do if my machines have problems?
1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.
3. Do you provide machine operation training?
Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.
4. Which machine model shall I choose when I purchase from you?
Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.
5. What's your machine's market share in China?
Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.
){kind=link}