| After-sales Service: | 24hour Online |
|---|---|
| Warranty: | 1 Year |
| Structure: | Three-Dimensional |
| Layout: | Three-Dimensional |
| Controlling Mode: | CNC |
| Number of Shaft: | 6 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Parameter name | Unit | Parameter value | Remark | |||
| Scope of work piece | Section steel | mm | 150x75~1250x600 | |||
| Thickness | mm | ≤80 | ||||
| Length | m | 15m | Configure according to customer demand | |||
| Short material limit | mm | Automatic processing≥3000 | ||||
| Manual processing:690~3000 | ||||||
| principal axis | Quantity | 3 | ||||
| drill hole Range |
Fixed side, mobile side | mm | ¢12~¢26.5 | |||
| Intermediate unit | mm | ¢12~¢33.5 | ||||
| Spindle speed | r/min | 180~560 | ||||
| Change the card head quickly | / | Morse taper hole 3#,,4# | Can change to 2# | |||
| Axial stroke | Fixed side, mobile side | mm | 140 | |||
| Intermediate unit | mm | 240 | ||||
| Axial feed rate | mm/min | 20~300 | ||||
| Moving distance | Each spindle is in the direction of workpiece length | mm | 520 | |||
| Both sides of the spindle in the up and down direction | mm | 35~570 | From the lower plane of the workpiece | |||
| The intermediate unit is in the direction of workpiece width | mm | 45~1160 | From the datum side | |||
| Cooling mode | Compressed air + cutting fluid | / | / | |||
| Air pressure | MPa | ≥0.5 | ||||
| Machining accuracy | Error of adjacent hole spacing in hole group | mm | ≤0.5 | |||
| Feeding error within 10 m length | mm | ≤1 | ||||
| Fuel tank capacity | L | 50 | ||||
| Precision | Distance error of adjacent holes in hole group | mm | ≤±0.5 | |||
| Accuracy of adjacent feeding distance within 10 meters | mm | ≤±1 | ||||
| Electric machinery power | Three phase asynchronous motor for spindle rotation | kW | 4x3 | Number of spindles 3 | ||
| Intermediate unit X-axis servo motor | kW | 0.85 | ||||
| Z-axis servo motor of intermediate unit | kW | 1.3 | ||||
| Fixed side and mobile side X-axis servo motor | kW | 0.85x2 | ||||
| Fixed side and mobile side Y-axis servo motor | kW | 1.3x2 | ||||
| Moving carriage three phase asynchronous motor | kW | 0.55 | ||||
| Over dimension | mm | About 4800×2400×3300 | ||||
| Weight | kg | About 7000 | ||||
| NO. | Code | Name | Quantity | Remark |
| 1 | KHQ50.1-6No3 | Extension rod (Mo's 3) | 3 | Full length of 150 mm including on the main engine |
| 2 | KHQ50.1-6No4 | Extension rod (Morse 4) | 1 | Full length of 150 mm including on the main engine |
| 3 | HZ24-9A | Bit extension (Morse 3) | 1 | Full length of 260mm including on the main engine |
| 4 | HZ24--10 | Bit extension (Morse 3) | 1 | Full length of 380 mm including on the main engine |
| 5 | SWZ10.1-88 | Wedge iron (Mo's 1) | 1 | |
| 6 | PD16.0-25 | Inclined iron (Mo's 3) | 1 | |
| 7 | PD16.0-26 | Inclined iron (Mo's 4) | 1 | |
| 8 | Sd0320 | Stepped seal ring 32 | 4 | |
| 9 | ¢95 | J-ring | 2 | |
| 10 | Φ 20mm nylon rope | 1 | 12m | |
| 11 | Butter thruster | 1 | ||
| 12 | Pressure oil pot | 1 | ||
| 13 | QDX1.5-16-0.37 | Single phase submersible pump | 1 | |
| 14 | GB/T1187 | Ф25mmWater delivery hose | 1 | 3m |
| 15 | ZBJ51002-87 | Hoop 40 | 1 | |
| 16 | JB/GQ0341-89 | Coupling 8 | 1 | |
| 17 | ZBJ51002-87 | Hoop 20 | 1 | |
| 18 | Pu tubeФ8 | 1 | 5m | |
| 19 | PUT08 | Tee joint | 1 | |
| 20 | 3#/2# | Variable diameter Morse taper sleeve | 3 | |
| 21 | GB/T9877.1 | Seal ring for rotating shaft60×80×10 | 2 | |
| 22 | Paint (with curing agent) | 3 | 1 barrel shield color, 2 barrel main engine color | |
| 23 | HDX-63X20Q | Filter element | 1 | Hydraulic parts |
| 24 | CD (including PC content) | 1 |
| NO. | Name | Brand | Country |
| 1 | Linear guide rail | HIWIN/CSK | Taiwan (China) |
| 2 | Electromagnetic hydraulic valve | ATOS/YUKEN | Italy/Japan |
| 3 | Hydraulic pump | Just mark | Taiwan (China) |
| 4 | Servo motor | Panasonics | Japan |
| 5 | Servo driver | Panasonics | Japan |
| 6 | PLC | MITSUBISHI | Japan |
| 7 | Spray cooling pump | BIJUR | USA |
| 8 | Flexible extension nozzle | BIJUR | USA |
| 9 | Pneumatic solenoid valve | AIRTAC | Taiwan (China) |
| 10 | Centralized lubrication | HERG/BIJUR | Japan/USA |
| 11 | Computer | Lenovo | China |
Note: The above is our fixed supplier. If the supplier can not supply the components in case of any special matter, we will adopt the components with the same level, but the quality is no worse than the above.
Product Feature:
Company Introduction:
Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.
Our Service
FAQ:
1. When can you arrange shipment?
For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.
2. What can you do if my machines have problems?
1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.
3. Do you provide machine operation training?
Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.
4. Which machine model shall I choose when I purchase from you?
Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.
5. What's your machine's market share in China?
Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}