PHM3030C/2 FINCM Tubesheet Bearing Flange CNC Hydraulic High Speed Drilling Machine
This machine is a gantry mobile CNC drilling machine, which is mainly used for drilling, milling, threading, chamfering and milling of tubesheets and flanges with a diameter of less than φ80.This equipment is mainly composed of bed and column, beam and horizontal sliding table, vertical ram type drilling and milling power box, worktable, chip conveyor, hydraulic system, pneumatic system, cooling system, centralized lubrication system, electrical system, etc.
Equipment advantages:
1. The bed and beam are welded with steel plates, all of which have undergone thermal aging treatment for stress relief.
2. The workbench adopts a fixed form, selects high-quality cast iron, and uses advanced technology to cast and shape, with large bearing capacity.
3. High-rigidity bearing seat, bearing adopts back-to-back installation method, high-precision screw special bearing.
4. The vertical (Z-axis) movement of the power head is guided by roller linear guide pairs arranged on both sides of the ram, with good guide rail accuracy, high vibration resistance and low friction coefficient.
5. The drilling power box of this machine tool is a rigid precision spindle type, adopts Taiwan BT50 internal cooling spindle, the spindle taper has a purging device, and can use cemented carbide internal cooling drills with high precision.
6. This machine tool adopts two flat chain chip conveyors on both sides of the worktable. Iron chips and coolant are collected in the chip conveyor, and the iron chips are transported to the chip conveyor, which is very convenient for chip removal; the coolant is Be recycled.
7. This machine tool provides two cooling methods-internal cooling and external cooling, which better guarantees the processing quality.
8. This machine tool is equipped with an automatic lubrication system, which regularly pumps lubricating oil into the lubrication points of the linear guide sub-slider, ball screw sub-screw and each rolling bearing of each component, so as to provide the most adequate and reliable lubrication, eliminating the need The tedious manual operation improves the service life of various parts.
Main technical specifications:
| Item |
Name |
Value |
| Maximum Plate Size |
L x W |
3000×3000 mm |
| Maximum Thickness |
250 mm |
| Work Table |
T Slot Width |
28 mm(standard) |
| Loading Weight |
3ton |
| Drilling Spindle |
Maximum Drilling Diameter |
φ80 mm |
| Drilling spindle's Rod Length vs. Hole diameter |
≤10 |
| RPM |
30~3000 r/min |
| Spindle Tape |
BT50 |
| Spindle motor power |
2*37kW |
| Maximum Torque n≤750r/min |
470Nm |
| Distance from Spindle bottom surface to the worktable |
280~780 mm
(adjustable as per material thickness) |
| Gantry Longitudinal Movement (X Axis) |
Max. Travel |
3000 mm |
| Movement speed along X axis |
0~16m/min |
| Servo motor power of X axis |
2×3.3kW |
Spindle Transversal Movement
(Y Axis) |
Max. Travel |
3000mm |
| Movement speed along Y axis |
0~16m/min |
| Servo motor power of X axis |
2*2.7kW |
Spindle Feeding Movement
(Z Axis) |
Max. Travel |
500 mm |
| Feeding speed of Z axis |
0~10m/min |
| Servo motor power of Z axis |
2*4.3kW |
| Positioning accuracy |
X axis,Y axis |
0.052mm/full travel |
| Repeatable positioning accuracy |
X axis,Y axis |
0.033mm/full travel |
| Hydraulic system |
Hydraulic pump pressure/Flow rate |
15MPa /22L/min |
| Hydraulic pump motor power |
5.5 kW |
| Pneumatic system |
Compressed air pressure |
0.5 MPa |
| Scrap removal and Cooling system |
Scrap removal tpe |
Plate chain |
| Scrap removal Nos. |
2 |
| Scrap removal speed |
1m/min |
| Motor Power |
2×0.75kW |
| Cooling way |
Inner cooling + Outside cooling |
| Max. Pressure |
2MPa |
| Max. Flow rate |
2*60L/min |
| Electronic system |
CNC control system |
Siemens 828D |
| CNC Axis Nos. |
6 |
| Total power |
About 110kW |
| Overall Dimension |
L×W×H |
About 7.8×6.7×4.1m |
| Machine weight |
|
About 35t |
Key outsourced components list:
| No. |
Name |
Brand |
Country |
| 1 |
Roller linear guide rail |
Hiwin/PMI |
China Taiwan |
| 2 |
CNC control system |
Siemens |
Germany |
| 3 |
Feeding servo motor and servo driver |
Siemens |
Germany |
| 4 |
Precise spindle |
Spintech/Kenturn |
China Taiwan |
| 5 |
Hydraulic valve |
Yuken/Justmark |
Japan/China Taiwan |
| 6 |
Oil pump |
Justmark |
China Taiwan |
| 7 |
Automatic lubricating system |
Herg |
Japan |
| 8 |
Button, Indicator, low voltage electronic components |
ABB |
Germany |
Note: The above is our fixed supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components due to any special matter.
Free Accessories list:
| No. |
Name |
Size |
Qty. |
| 1 |
Optical edge finder |
|
1 piece |
| 2 |
Inner hexagon wrench |
|
1 set |
| 3 |
Tool holder and pull stud |
Φ40-BT50 |
2 pcs |
| 4 |
Tool holder and pull stud |
Φ20-BT50 |
1 piece |
| 5 |
Spare paints |
-- |
2 kegs |
Work Environment:
1).Power supply: 3 phase 5 lines 380±10%V 50±1HZ
2).Compressed air pressure: ≥0.5MPa
3).Temperature: 0-40°C
4).Humidity: ≤75%
Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.
Customer praise:
FAQ:
1. When can you arrange shipment?
For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.
2. What can you do if my machines have problems?
1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.
3. Do you provide machine operation training?
Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.
4. Which machine model shall I choose when I purchase from you?
Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.
5. What's your machine's market share in China?
Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.
Audited Supplier 
){kind=link}