PHM5050C/2 FINCM Heat Exchange Tube Sheet Flange CNC High-Speed Drilling Machine 5000mm*5000mm * 250mm
Production Description:
PHM5050C/2 Gantry Movable CNC Plate Drilling Machine
Machine Purpose:
The machine is a gantry mobile CNC drilling machine, which is mainly used for drilling pipe plate and flange parts with Maximum diameter 80mm, thread milling, hole groove, chamfering and milling.
Machine Features:
The machine frame body and cross beam are in welded fabricated structure, after enough aging heat treatment, with very good accuracy. The work table, transversal sliding table and ram all are made from cast iron.
Two sides'dual servo driving system at X axis assures the gantry's parallel accurate movement, and the good squareness of Y axis and X axis.
The worktable adopts fixed form, high-quality cast iron and advanced casting process, with large bearing capacity.
High rigidity bearing seat, bearing adopts back-to-back installation method, special bearing with high precision screw.
The drilling power box of this machine tool belongs to rigid precision spindle type, which adopts Taiwan BT50 internal cooling spindle. The spindle cone hole has a purging device, and can use cemented carbide internal cooling drill, with high precision. The spindle is driven by high-power spindle servo motor through synchronous belt, the reduction ratio is 2.0, the spindle speed is 30 ~ 3000r / min, and the speed range is wide.
Main technical specifications:
| Item |
Name |
Value |
| Maximum Plate Size |
L x W |
5000×5000 mm |
| Maximum Thickness |
250 mm |
| Work Table |
T Slot Width |
28 mm(standard) |
| Loading Weight |
3ton/m2 |
| Drilling Spindle |
Maximum Drilling Diameter |
φ80 mm |
| Drilling spindle's Rod Length vs. Hole diameter |
≤10 |
| RPM |
30~3000 r/min |
| Spindle Tape |
BT50 |
| Spindle motor power |
2*37kW |
| Maximum Torque n≤750r/min |
470Nm |
| Distance from Spindle bottom surface to the worktable |
280~780 mm
(adjustable as per material thickness) |
| Gantry Longitudinal Movement (X Axis) |
Max. stroke |
5000 mm |
| Movement speed along X axis |
0~16m/min |
| Servo motor power of X axis |
2×3.3kW |
Spindle Transversal Movement
(Y Axis) |
Max. stroke |
5000mm |
| Movement speed along Y axis |
0~16m/min |
| Servo motor power of X axis |
2*2.7kW |
Spindle Feeding Movement
(Z Axis) |
Max. stroke |
500 mm |
| Feeding speed of Z axis |
0~10m/min |
| Servo motor power of Z axis |
2*4.3kW |
| Positioning accuracy |
X axis,Y axis |
0.08mm/full travel |
| Repeatable positioning accuracy |
X axis,Y axis |
0.05mm/full travel |
| Hydraulic system |
Hydraulic pump pressure/Flow rate |
15MPa /22L/min |
| Hydraulic pump motor power |
5.5 kW |
| Pneumatic system |
Compressed air pressure |
0.5 MPa |
| Scrap removal and Cooling system |
Scrap removal type |
Plate chain |
| Scrap removal Nos. |
2 |
| Scrap removal speed |
1m/min |
| Motor Power |
2×0.75kW |
| Cooling way |
Inner cooling + Outside cooling |
| Max. Pressure |
2MPa |
| Max. Flow rate |
2*60L/min |
| Electronic system |
CNC control system |
Siemens 828D |
| CNC Axis Nos. |
6 |
| Total power |
About 110kW |
| Overall Dimension |
L×W×H |
About 9.8×8.7×4.1m |
| Machine weight |
|
About 50t |
Key outsourced components list:
| No. |
Name |
Brand |
Country |
| 1 |
Roller linear guide rail |
HIWIN/HTPM |
China Taiwan/China Mainland |
| 2 |
CNC control system |
Siemens |
Germany |
| 3 |
Feeding servo motor and servo driver |
Siemens |
Germany |
| 4 |
Precise spindle |
Spintech/Kenturn |
China Taiwan |
| 5 |
Hydraulic valve |
Yuken/Justmark |
Japan/China Taiwan |
| 6 |
Oil pump |
Justmark |
China Taiwan |
| 7 |
Automatic lubricating system |
Herg |
Japan |
| 8 |
Button, Indicator, low voltage electronic components |
ABB |
Germany |
Note: The above is our fixed supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components due to any special matter.
Free Accessories list:
| No. |
Name |
Size |
Qty. |
| 1 |
Optical edge finder |
|
1 piece |
| 2 |
Inner hexagon wrench |
|
1 set |
| 3 |
Tool holder and pull stud |
Φ40-BT50 |
2 pcs |
| 4 |
Tool holder and pull stud |
Φ20-BT50 |
1 piece |
| 5 |
Spare paints |
-- |
2 kegs |
Work Environment:
1).Power supply: 3 phase 5 lines 380±10%V 50±1HZ
2).Compressed air pressure: ≥0.5MPa
3).Temperature: 0-40°C
4).Humidity: ≤75%
Our company:
Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.
FAQ:
1. When can you arrange shipment?
For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.
2. What can you do if my machines have problems?
1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.
3. Do you provide machine operation training?
Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.
4. Which machine model shall I choose when I purchase from you?
Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.
5. What's your machine's market share in China?
Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.
Audited Supplier 
){kind=link}