Heat Exchange Boiler Drum Horizontal High-Speed Pipe Drilling CNC Machine 780mm-1200m
Product Description:
HD1212/3 machine is mainly use to drilling hole of tube or boiler drum ;
Machine Purpose:
This Machine is mainly used to drill tube holes on header tube which used for boiler industry. It also could use special tools to make welding groove, greatly increase the hole's precision and drilling efficiency.
Machine Features:
The No.1 bed of this machine tool is mainly used to carry workpieces. One end of the bed is equipped with a fixed bed head, and two rectangular guide rails are laid on the plane of the bed. The bed tail can slide on it. Both the bed head and the bed tail are equipped with hydraulic three jaw chuck, which can realize the automatic centering and clamping of the drum. The clamping diameter range is Φ 780 - Φ 1200mm. The bed tail can move longitudinally to adapt to the 2-12m long drum.
The No.2 bed of this machine tool is mainly used to carry the longitudinal movement of drilling power head. The machine tool has three independent drilling power heads, which respectively rely on the longitudinal slide and the hydraulic slide to move longitudinally on the No. 2 bed.When the movement stops, it can be hydraulically locked.
The power head can realize the automatic control stroke through the hydraulic sliding table, and realize the automatic conversion of fast forward, work forward and fast backward. By adjusting the position of the non-contact switch block, it can also be realized that when the drill bit exits a certain distance at the end of the drilling, it automatically stops, without having to completely retract to the limit position, which saves man-hours and improves efficiency. The three power heads are independent and can realize automatic drilling with high efficiency and good precision. The spindle speed is adjusted by the frequency converter, and the speed is 80-200r/min, which can meet the processing requirements of different drill diameters and different drum materials. The maximum drilling diameter can reach Φ65mm, and the processing range is wide.
The front and rear supports of this machine tool can realize adaptive hydraulic clamping before and after the drum after the drum is clamped by the chuck, which improves the drilling rigidity of the drum.
Main Technical Specifications:
Workpiece size |
Drum diameter range |
Φ780-Φ1200mm |
| Drum length range |
2-12m |
| Maximum wall thickness |
50mm |
| Maximum weight of workpiece |
15T |
| Maximum diameter of borehole |
Φ65mm |
| Hole spacing accuracy |
Distance between adjacent holes:±1.0mm
Farthest hole distance:±1.5mm |
Power head of drilling spindle |
Type |
Hydraulic slide,
Fast forward work forward fast backward automatic conversion |
| Quantity |
3 |
| Spindle taper hole |
6 |
| Spindle speed |
80-200r/min |
| Spindle stroke |
500mm |
spindle feed speed
(hydraulic stepless) |
10-200mm/min |
| Spindle motor power |
3x7.5kW |
| X-axis positioning accuracy |
0.2mm |
| Working temperature of hydraulic oil |
≤60ºC |
| Laser alignment device |
Adjust hole group position according to weld position |
| Workpiece rotation speed |
0~2.8r/min |
| Moving speed of slide |
0~10m/min |
| Power of tail seat drive motor |
2.2kW |
| Servo motor power of slide drive |
3X2kW |
| Cooling pump motor power |
450W |
| Chip conveyor drive motor power |
750W |
| Height between chuck center and ground |
About 1570mm |
| Machine tool overall dimension (L x W x H) |
About 22x5x2.5m |
List of the KeyOutsourcedComponents:
| NO |
Name |
Brand |
Country |
| 1 |
linear guide rail |
HIWIN/PMI |
Taiwan China |
| 2 |
Precision reducer and rack and pinion pair |
ATLANTA |
Germany |
| 3 |
Numerical control system |
Siemens 808D |
Germany |
| 4 |
servo motor |
Siemens |
Germany |
| 5 |
Slide drive servo motor and driver |
Siemens |
Germany |
| 6 |
Frequency converter |
Siemens |
Germany |
| 7 |
Hydraulic pump |
justmark |
Taiwan,China |
| 8 |
Hydraulic valve |
ATOS/Justmark |
Italy / Taiwan, China |
| 9 |
Drag chain |
Igus |
Germany |
| 10 |
Button, indicator light and other main electrical components |
Schneider |
France |
- Note: The above is our fixed supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components in case of any special matter.
Work Environment:
1).Power supply: 3 phase 4 lines 380±10%V 50±1HZ
2).Compressed air pressure: ≥0.5MPa
3).Temperature: 0-40°C
4).Humidity: ≤75%
Company Introduction:
Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
Production Application Industry:
FAQ:
1. When can you arrange shipment?
For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.
2. What can you do if my machines have problems?
1) We can send you free components if machines are in warranty period;
2) 24 hours service on line;
3) We can assign our engineers to serve you if you want.
3. Do you provide machine operation training?
Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.
4. Which machine model shall I choose when I purchase from you?
Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.
5. What's your machine's market share in China?
Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.
-
Audited Supplier 
){kind=link}